Coagulant flocculant DEFLOCAR 5kg jug

High-power coagulant and flocculant for removing suspended particles in pools. Water recovery in car wash facilities. Application in automatic dosing equipment.APPLICATION:Flocculant and coagulant for suspended particles, specifically designed for the treatment of swimming pool water.PHYSICO-CHEMICAL PROPERTIES:•    Dense yellowish liquid, water-soluble•    Density at 20 °C: 1.21 ± 0.02 g/cm³•    pH at 10%: 3.8 ± 0.2FEATURES:•    Authorized by health authorities for flocculation in the treatment of drinking water.•    Completely soluble in water, in all proportions and at any temperature.•    Avoid exposing the product to extreme temperatures.•    Complies with UNE-EN 883:1997 and Royal Decree 140/2003, which establishes sanitary criteria for drinking water.INSTRUCTIONS FOR USE:Unlike other products, DEFLOCAR does not require the water pH to be raised to 9.5–10; it can be added directly.Recommended Dosages (depending on water condition):•    Maintenance: 5 g/m³•    Turbid water: 25–35 g/m³•    Very turbid water: 50 g/m³Preparation and Application:1.    Choose the recommended dose.2.    Dissolve the product at a ratio of 10 g of DEFLOCAR per liter of water.3.    Add the solution evenly to the water to be treated.After Application:•    Let the water stand, preferably overnight, to allow sedimentation of suspended particles.•    The sediment can then be removed with a vacuum cleaner or discharged through a bottom drain.•    In swimming pools, do not recirculate the aspirated or drained water—discard it instead.•    Resume filtration until the water is fully clarified.•    Finally, check and adjust the pH using pH-PLUS-L if necessary.